Fountain cleaner

Effective special cleaner for algae in ornamental fountains

For basic and maintenance cleaning of fountains, ornamental fountains and water features in public places. Removes deposits on concrete, natural stone, tiles, wood, glass, metals and plastics without mechanical assistance. Effective against algae, limescale, rust, iron, manganese, grease and soot.

• Liquid concentrate based on mineral acid
• Biodegradable and hydrochloric acid-free
• Almost always works alone, i.e. without mechanical assistance

Application:

Always use concentrate diluted with water.

Basic cleaning: 1:1 – 1:5
For coarse contamination: 1:5 – 1:10
Maintenance cleaning: 1:10 – 1:30

Cleaning is done with a sprayer, pressure pump atomizer, rubber scrubber, sponge, or similar. After cleaning, rinse well with clean water.
Non-ferrous metals regain their original shine. Where this is not desired, as well as with light metals, chrome-plated and galvanized parts, only use a dilution of 1:20 or more with a contact time of max. 3 minutes.

For further information, see the instructions. No warranty is provided due to the versatility of the application.

Labeling:

Danger

Hazard warnings:
May be corrosive to metals.
Causes severe skin burns and eye damage.

Safety instructions:
Wear protective gloves/protective clothing/eye protection/face protection.
IF SWALLOWED: Rinse mouth. DO NOT induce vomiting.
IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF exposed or concerned: Immediately call a POISON CENTER/doctor.